Project Apartments in Viareggio, Viareggio


Yard	new realization
Location	Viareggio, Italy
Subcategory	APARTMENTS
Built in	2010
Opened in	2010
Application	apartments realization
Application Type	Wall coverings
Client	Costruzioni Edil-Ston
Contractor company	Costruzioni Edil-Ston
Installer companies	Costruzioni Edil-Ston
Architects	arch. Stefano Montemagni; geo. Marco Bertelli
MAPEI Distributor	Dini & Denna
Credits	Sergio Fortuna
Project Manager	ing. Angelo Puccinelli

ADESILEX PG1 ADESILEX PG2

Two-component thixotropic epoxy adhesives for structural bonding WHERE TO USE Structural repair, bonding and reinforcement of concrete elements, natural stone, mortar and brick with very low…

Two-component thixotropic epoxy adhesives for structural bonding WHERE TO USE…

ADESILEX T SUPER

Adhesive for welding high-pressure PVC pipes. TECHNICAL DATA: Viscosity: fluid liquid. Final tensile strength: like the bonded PVC-pipe. Dry solids content: 35%. Colour: red. Application: brush.…

Adhesive for welding high-pressure PVC pipes. TECHNICAL DATA: Viscosity: fluid…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of…

Two-component, high-performance, highly-deformable, quick-setting and drying…

IDROSTOP B25

Hydro-expanding bentonite jointing material for sealing construction joints. TECHNICAL DATA: Shape: pre-formed tape. Size: 20x25 mm. Storage: 24 months. Application temperature range: from -5°C to…

Hydro-expanding bentonite jointing material for sealing construction joints.…

IDROSTOP MASTIC

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency: thixotropic paste. Dry solids content: 100%. Storage: 18 months. Application temperature range: from +5°C to +35°C. Dust dry:…

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency:…

KERACOLOR FF

KERACOLOR FF is a high-performance , polymer-modified cementitious mortar with water-repellent DropEffect® technology for grouting joints up to 6 mm. A vailable in 20 colours. Mixed with the…

KERACOLOR FF is a high-performance , polymer-modified cementitious mortar with…

KERACOLOR SF

Fine-grained, high-performance white cementitious mortar for grouting joints up to 4 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Fine-grained, high-performance white cementitious mortar for grouting joints up…

KERAFLEX MAXI S1

High-performance, deformable cementitious adhesive with no vertical slip, extended open time, excellent workability and Low Dust technology for ceramic tiles, particularly recommended for bonding…

High-performance, deformable cementitious adhesive with no vertical slip,…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. WHERE TO USE ·Waterproofing corners between adjacent walls and between walls and floors before…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement. TECHNICAL DATA: Sizes available: – 17 cm (MAPEBAND TPE 170); – 32.5 cm (MAPEBAND TPE 325). Width of…

TPE tape for flexible sealing and waterproofing of expansion joints and cracks…

MAPELASTIC FOUNDATION

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL…

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPEPROOF

Bentonite waterproofing sheets for structures below ground level, suitable for both horizontal and vertical surfaces. TECHNICAL DATA: Lower layer of geo-textile fabric: polypropylene fabric, 140…

Bentonite waterproofing sheets for structures below ground level, suitable for…

MAPEPROOF SWELL

Hydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using an extrusion pistol. TECHNICAL DATA: Consistency: thixotropic paste. Solubility: non-soluble in water. Dry solids…

Hydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPESILENT PANEL

Tiles with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement, sandwiched to a resilient layer of polyester fibre. TECHNICAL DATA: Tensile strength: –…

Tiles with a bitumen and special polymer-based elasto-plastomeric membrane with…

MAPESILENT ROLL

Sheets with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement sandwiched to a layer of resilient polyester fibre coated with blue, non-woven polypropylene…

Sheets with a bitumen and special polymer-based elasto-plastomeric membrane…

MAPETEX SEL

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes. TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile strength: 5 KN/m. Deformation at maximum strain: – 90%…

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing…

MAPETHERM FIX 9

Polyprpoylene fastener. TECHNICAL DATA: Composition: polypropylene. Colour: grey. Sizes available mm: 83. Packaging: boxes of 500 pieces.

Polyprpoylene fastener. TECHNICAL DATA: Composition: polypropylene. Colour:…

MAPETHERM NET

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems. TECHNICAL DATA: Composition: 100% glass…

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when…

PLASTIMUL 1K SUPER PLUS

One-component, solvent-free, quick-drying, low-shrinkage, high-yield, high flexibility bitumen waterproofing emulsion containing polystyrene spheres and rubber granules. TECHNICAL DATA: Consistency:…

One-component, solvent-free, quick-drying, low-shrinkage, high-yield, high…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints 2 to 20 mm wide.…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…