One-component, anti-corrosion cementitious mortar for steel reinforcement rods CO2 FULLY OFFSET PRODUCTS Mapefer 1K Zero is part of the CO2 Fully Offset in the Entire Life Cycle line of products. CO2…
One-component, anti-corrosion cementitious mortar for steel reinforcement rods…
Structural polymer fibres for concrete WHERE TO USE Mapefibre ST 50 Twisted are particularly suitable for the following: ·installation of industrial floors; ·production of pre-cast concrete panels…
Structural polymer fibres for concrete WHERE TO USE Mapefibre ST 50 Twisted are…
General purpose non-shrink grout WHERE TO USE Recommended for grouting voids in structural elements such as: patching up honeycombs in concrete, filling gaps in precast elements, and grouting base…
General purpose non-shrink grout WHERE TO USE Recommended for grouting voids in…
Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…
Paintable hybrid sealant and adhesive with a high modulus of elasticity also…
Four-component high-strength polyurethane/cement-based mortar with high resistance to chemicals for coating industrial floors in layers from 6 to 9 mm thick. WHERE TO USE Mapefloor CPU/HD CN is a…
Four-component high-strength polyurethane/cement-based mortar with high…
Three-component acid and wear-resistant epoxy mortar for floors. TECHNICAL DATA: Mixing ratio: A/B/C = 7.5/2.5/90. Consistency of mix: damp sand. Application temperature range: from +5°C to +30°C.…
Three-component acid and wear-resistant epoxy mortar for floors. TECHNICAL…
Keep in touch
