Back

TRIBLOCK P

Three-component epoxy-cementitious coating for damp substrates, especially suitable for basement moisture barrier.

WHERE TO USE

Triblock P is used as a waterproofing treatment for damp substrates, and especially:

·old ceramic or terrazzo floor dressings on substrates with excessive residual humidity;

·highly-compact cementitious substrates with a residual humidity content higher than the level recommended for laying wooden, resilient and resin floors;

·treating damp concrete surfaces before applying protective and anti-corrosion epoxy products, or polyurethane dressing systems which are impermeable to water vapour;

·dressing concrete channels, drains and pipe-work;

and by adding 0.25 Quartz o 0.5 Quartz sand at a ratio of 1 : 0.5 for smoothing over uneven surfaces.

CONSUMPTION

·250-300 g/m² per coat on non-absorbent surfaces.

·400-500 g/m² per coat on absorbent surfaces.

·1.5 kg/m² per mm of thickness for smoothing applications.

PACKAGING

5 kg kits (A + B + C):

component A: 0.6 kg;

component B: 1.9 kg;

component C: 2.5 kg.