Fluid epoxy impregnator in water dispersion for consolidating and priming wooden structures. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 1 : 1. Workability time: 30-40 minutes. Final hardening…
Fluid epoxy impregnator in water dispersion for consolidating and priming…
Schnellabbindender, hellgrauer Feinmörtel zur partiellen Ausbesserung und kosmetischen Reparatur von oberflächennahen Schäden an horizontalen und vertikalen Betonoberflächen, Zement- und…
Schnellabbindender, hellgrauer Feinmörtel zur partiellen Ausbesserung und…
Pultruded carbon fibre tube impregnated with epoxy resin for reinforced stitching in masonry. TECHNICAL DATA: Tensile modulus of elasticity: 170,000 N/mm². Content of fibre by weight: 68%. Tensile…
Pultruded carbon fibre tube impregnated with epoxy resin for reinforced…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X404 is formulated for the preparation of high performance concrete with high fluidity (consistency class S4 and S5 according to…
Hyperplasticiser for concrete with low loss of workability. Mapefluid X404 is…
Superplasticizer based on modified acrylic polymer for precast concrete with low water/cement ratio and high mechanical strengths at early age in winter weather
Superplasticizer based on modified acrylic polymer for precast concrete with…
Super-plasticizers based on a modified acrylic polymer for precast concrete with low water/cement ratio and very high mechanical strengths at early and final age in winter time, without steam curing…
Super-plasticizers based on a modified acrylic polymer for precast concrete…
Superplasticiser based on acrylic modified polymer for precast concrete with low water/cement ratio and very high mechanical strengths at early age at low temperatures. Dynamon SP2 is a modified…
Superplasticiser based on acrylic modified polymer for precast concrete with…
Solvent gel to remove adhesives and paint. Where to use: - Removal of old natural and synthetic resin based adhesives and paint. - Cleaning old adhesives from marble and ceramic flooring, levelling…
Solvent gel to remove adhesives and paint. Where to use: - Removal of old…
Waterproofing primer in water dispersion. TECHNICAL DATA: Consistency: liquid. Colour: pink. Waiting time between each coat: 20-30 minutes. Waiting time before laying coating: approx. 12 hours.…
Waterproofing primer in water dispersion. TECHNICAL DATA: Consistency: liquid.…
Synthetic stucco paste for smoothing walls. Where to use: Levelling compound on internal walls of float finished cement, stucco walls or panels in gypsum plaster or gypsum board, wood, wood…
Synthetic stucco paste for smoothing walls. Where to use: Levelling compound on…
Fast hardening (24-48 hours) self-levelling smoothing compound for thicknesses from 3 to 10 mm, especially suitable for pump applications. Where to use: - Interior levelling of new or existing…
Fast hardening (24-48 hours) self-levelling smoothing compound for thicknesses…
Hydro-expanding bentonite jointing material for sealing construction joints. TECHNICAL DATA: Shape: pre-formed tape. Size: 20x25 mm. Storage: 24 months. Application temperature range: from -5°C to…
Hydro-expanding bentonite jointing material for sealing construction joints.…
Osmotic cementitious mortar suitable for contact with drinking water for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approximately 1 hour.…
Osmotic cementitious mortar suitable for contact with drinking water for…
Two-component epoxy adhesive for the installation of rubber flooring. Where to use: Bonding of: - tile or sheet rubber flooring (with flat-back or canvas imprint or stalk back) for interiors and…
Two-component epoxy adhesive for the installation of rubber flooring. Where to…
Two-component, low-viscosity polyurethane adhesive with no water or solvents for bonding PVC and rubber floors on Internal and external surfaces. Technical data: Consistency: comp. A: thick paste;…
Two-component, low-viscosity polyurethane adhesive with no water or solvents…
Cementitious adhesive for ceramic tiles (thickness of adhesive up to 15 mm). Conformity of Kerafloor is declared in ITT certificates n° 25050161/Gi and n° 25080270/Gi (TUM) issued by the Technische…
Cementitious adhesive for ceramic tiles (thickness of adhesive up to 15 mm).…
