Expansive agent for shrinkage-compensating concrete. WHERE TO USE For the production of shrinkage-compensating concrete and mortar. DOSAGE Expancrete can be used at a dosage of 5% to 8% by weight of…
Expansive agent for shrinkage-compensating concrete. WHERE TO USE For the…
Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…
Water-based acrylic undercoat and bonding promoter with a smooth finish.…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…
One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating water. The reaction time may be regulated.…
One-component, ultra-fluid polyurethane resin applied by injection for…
Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces broadcast with quartz sand. TECHNICAL DATA: Application…
Surface treatment in liquid form made from lithium silicate with a…
One-component, solvent-free primer for polyurethane sealants, for use on absorbent and non-absorbent surfaces. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Inflammable: no. Application…
One-component, solvent-free primer for polyurethane sealants, for use on…
Lime-cement skimming mortar with a fine-textured, natural finish for render and concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of PLANITOP 530 with 24-27…
Lime-cement skimming mortar with a fine-textured, natural finish for render and…
Lime-cement skimming mortar with an ultra-fine-textured finish for render. TECHNICAL DATA: Maximum dimension of aggregate: < 0.1 mm. Mixing ratio: 100 parts of PLANITOP 560 with 39-43 parts of water.…
Lime-cement skimming mortar with an ultra-fine-textured finish for render.…
Bulk powder or liquid water-repellent for cementitious mortar. TECHNICAL DATA: Consistency: powder or liquid. Pot life of mix: approximately 1 hour. Storage: 12 months. Consumption: – IDROSILEX…
Bulk powder or liquid water-repellent for cementitious mortar. TECHNICAL DATA:…
Multipurpose latex additive for mortar and cementitious adhesive For the preparation of high performance mortar, screeds and renders. TECHNICAL DATA: Storage: 24 months. Consumption: depends on…
Multipurpose latex additive for mortar and cementitious adhesive For the…
Hydro-oil repellent and anti-stain treatment for concrete, natural stone and cementitious surfaces made from modified organic polymers in water solution. TECHNICAL DATA: Application temperature…
Hydro-oil repellent and anti-stain treatment for concrete, natural stone and…
Especially fine non-slip cementitious adhesive for absorbent ceramic tiles WHERE TO USE For interior fixing of ceramic tiles and ceramic mosaics, double-fired or single-fired on floors and walls on…
Especially fine non-slip cementitious adhesive for absorbent ceramic tiles…
Pultruded carbon fibre plate with a protective plastic film on both faces. TECHNICAL DATA: Modulus of elasticity: 170 - 200 - 250 GPa. Fibre content: 68% - 68% - 65%. Thickness: 1.4 mm. Width: 50,…
Pultruded carbon fibre plate with a protective plastic film on both faces.…
Paintable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.24 N/mm². Shore A…
Paintable polyurethane sealant with a low modulus of elasticity for movements…
Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in rolls in various lengths according to the diameter of…
Closed-cell, extruded foam polyethylene cord used as a support for elastomer…
Solvent gel for removing adhesive and paint. TECHNICAL DATA: Consistency: gel. Colour: transparent. Inflammable: yes. Application temperature range: from +10°C to +35°C. Removal time: – adhesives in…
Solvent gel for removing adhesive and paint. TECHNICAL DATA: Consistency: gel.…
Two-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as…
Two-component, solvent-free epoxy primer used as bonding promoter for products…
Two-component, shiny epoxy finish in water dispersion for anti-dust and anti-grease treatments on concrete floors, cementitious substrates and as a finishing coat on epoxy systems. TECHNICAL DATA:…
Two-component, shiny epoxy finish in water dispersion for anti-dust and…
