Superfluidificante a base acrilica modificata per calcestruzzi con bassi rapporti acqua/cemento e lunghissimo mantenimento della lavorabilità anche in climi caldi
Superfluidificante a base acrilica modificata per calcestruzzi con bassi…
Hardening accelerating admixture for chloride-free concrete Where to use Dynamon HAA is particularly suitable for reaching very high mechanical strengths at early age, even at low temperatures. Used…
Hardening accelerating admixture for chloride-free concrete Where to use…
Fine aggregate supplementing super-plasticizer for concrete with low loss of workability and high reduction of mixing water Where to use Dynamon SX 14 is particularly suitable for all applications…
Fine aggregate supplementing super-plasticizer for concrete with low loss of…
Modified acrylic super-plasticiser for concrete, characterised by its low water/cement ratio, very high mechanical strength and long workability times. TECHNICAL DATA: Dosage: 0.5-2 lit every 100 kg…
Modified acrylic super-plasticiser for concrete, characterised by its low…
Super-plasticizers based on a modified acrylic polymer for ready-mix concrete with low water/cement ratio, extremely high mechanical strength and long slump retention Where to use Dynamon SR3 is…
Super-plasticizers based on a modified acrylic polymer for ready-mix concrete…
Superplasticiser based on modified acrylic polymer for ready mix concrete with low water/cement ratio and very long slump retention in hot climates. Dynamon SR2 is a modified acrylic-based high…
Superplasticiser based on modified acrylic polymer for ready mix concrete with…
Super-plasticizers based on a modified acrylic polymer for ready-mix concrete with low water/cement ratio, high mechanical strength and long slump retention Where to use Dynamon SR1 is particularly…
Super-plasticizers based on a modified acrylic polymer for ready-mix concrete…
Super-plasticizers based on a modified acrylic polymer for precast concrete with low water/cement ratio and very high mechanical strengths at early and final age Where to use Dynamon SP1 is…
Super-plasticizers based on a modified acrylic polymer for precast concrete…
Two-component multipurpose epoxy formulate for industrial floors in compliance with standards applied to the drinks and foodstuffs industry and clean rooms
Two-component multipurpose epoxy formulate for industrial floors in compliance…
Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…
Two-component epoxy resin with a very low viscosity for injecting into…
Plasticizing and anti-shrinkage agent for slurries for injection Where to use Expanfluid can be used in preparing: – grouts for filling the casings of post-tensioning cables in pre-stressed concrete;…
Plasticizing and anti-shrinkage agent for slurries for injection Where to use…
Two-component thixotropic epoxy adhesives for structural bonding WHERE TO USE Structural repair, bonding and reinforcement of concrete elements, natural stone, mortar and brick with very low…
Two-component thixotropic epoxy adhesives for structural bonding WHERE TO USE…
Fast hardening self-levelling smoothing compound for thicknesses from 1 to 5 mm. Where to use: - Interior levelling of new or existing substrates to make them ready to receive resilient or textile…
Fast hardening self-levelling smoothing compound for thicknesses from 1 to 5…
Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts…
Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.…
Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot…
Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…
Cementitious binder for manufacturing dimensionally stable self-compacting concrete mixtures to repair concrete structures. Stabilcem SCC is used to manufacture concretes with different aggregate…
Cementitious binder for manufacturing dimensionally stable self-compacting…
One-component, solvent-free, moisture curing polyurethane primer with a very low emission level of volatile organic compounds (VOC) for consolidating and waterproofing cementitious screeds. TECHNICAL…
One-component, solvent-free, moisture curing polyurethane primer with a very…
Solvent-free, silane-based, thixotropic water repellent in water dispersion, ideal for hydrophobic treatments on concrete. TECHNICAL DATA: Colour: yellowish white. Appearance: creamy. Density…
Solvent-free, silane-based, thixotropic water repellent in water dispersion,…
