Premium Latex Additive for Kerabond and Kerabond T Keralastic is a premium-grade, high-performance, second-generation “flexible” acrylic latex additive used in the Kerabond/Keralastic and Kerabond…
Premium Latex Additive for Kerabond and Kerabond T Keralastic is a…
Kerabond T is a premium-grade, nonsag, nonslump mortar for use in thin-set and large-and-heavy-tile applications in interior/exterior residential and commercial floors and walls when mixed with water.
Kerabond T is a premium-grade, nonsag, nonslump mortar for use in thin-set and…
Kerabond T / Keralastic System is a high-performance, two-part system: Keralastic , a second-generation “flexible” acrylic latex additive, is used to enhance the performance of Kerabond T , which is…
Kerabond T / Keralastic System is a high-performance, two-part system:…
Planitop 18 ES is a one-component, high-early-strength, cementitious repair mortar, with a corrosion inhibitor, that has the very rapid-hardening characteristics of Planitop 18 but with an extended…
Planitop 18 ES is a one-component, high-early-strength, cementitious repair…
Mapecem 100 is a one-component, shrinkage-compensated, cementitious mortar intended for the renovation and topping of interior horizontal concrete and engineer-approved surfaces.
Mapecem 100 is a one-component, shrinkage-compensated, cementitious mortar…
Ker 121 is a professional-grade, single-component, high-performance mortarfor the installation of ceramic, marble, granite and porcelain stoneware over most traditional and specialty substrates. Ker…
Ker 121 is a professional-grade, single-component, high-performance mortarfor…
Elastocolor Flex is an elastomeric, high-build, water-based, 100%-acrylic coating to protect and decorate above-grade, vertical exterior concrete, masonry, stucco and EIFS systems. Elastocolor Flex…
Elastocolor Flex is an elastomeric, high-build, water-based, 100%-acrylic…
Dynamon EW is a polymeric slump-retaining admixture designed to stabilize the concrete consistency for two hours or more, with little or no effect on set time at the recommended dosage. Dynamon EW is…
Dynamon EW is a polymeric slump-retaining admixture designed to stabilize the…
4 to 1 is a preblended mixture of finely graded sand and Portland cement used for thick-bed mortar installations. 4 to 1 flattens and levels an existing substrate before the installation of tile and…
4 to 1 is a preblended mixture of finely graded sand and Portland cement used…
MapeWrap 12 is a two-component, 100%-solids, moisture-tolerant, structural epoxy used as an adhesive for the Carboplate composite system in warm climates. MapeWrap 12 is also used for leveling…
MapeWrap 12 is a two-component, 100%-solids, moisture-tolerant, structural…
MapeWrap 31 is a 100%-solids, moisture-tolerant, medium-viscosity, epoxy resin for impregnating MapeWrap composite system fabrics by a dry layup method. MapeWrap 31 was specially developed to…
MapeWrap 31 is a 100%-solids, moisture-tolerant, medium-viscosity, epoxy resin…
MapeWrap 21 is a 100%-solids, moisture-tolerant, low-viscosity, epoxy resin used to encapsulate the MapeWrap composite system fabrics. MapeWrap 21 was specially developed to saturate and encapsulate…
MapeWrap 21 is a 100%-solids, moisture-tolerant, low-viscosity, epoxy resin…
MapeWrap 11 is a two-component, 100%-solids, moisture-tolerant, structural epoxy used as an adhesive for the Carboplate composite system in horizontal, vertical and overhead applications. MapeWrap 11…
MapeWrap 11 is a two-component, 100%-solids, moisture-tolerant, structural…
Planiseal WR 100 is a clear, high-performance, 100%-silane, penetrating water repellent and sealer designed to provide water repellency on concrete and masonry. It penetrates deeply, protecting new…
Planiseal WR 100 is a clear, high-performance, 100%-silane, penetrating water…
Planiseal WR 40 is a water-based, 40%-silane, penetrating water repellent and sealer designed to protect concrete and masonry against moisture/chloride intrusion.
Planiseal WR 40 is a water-based, 40%-silane, penetrating water repellent and…
Mapecrete Film is designed to retard moisture evaporation on concrete surfaces and aid in finishing concrete flatwork. Mapecrete Film forms a thin film to prevent rapid moisture loss on freshly…
Mapecrete Film is designed to retard moisture evaporation on concrete surfaces…
Ultrabond Turf PU 1K is a fast-setting, moisture-curing, one-component, urethane adhesive specifically designed for bonding of synthetic turf in high-performance sports installations. Offering…
Ultrabond Turf PU 1K is a fast-setting, moisture-curing, one-component,…
