Project Route 2020, Dubai


Yard	Tunnels and stations
Location	Dubai, United Arab Emirates
Subcategory	TUNNEL
Application	Supply of products for underground construction and ceramic installation
Application Type	Products for underground construction (utt)

EPORIP

TECHNICAL DATA: Pot life: 60 minutes Open time: 5 hours Setting time: 24 hours Final cure time: 15 days Application: by brush, trowel, pouring Storage: 24 months Consumption: 0.5-2 kg/m2…

TECHNICAL DATA: Pot life: 60 minutes Open time: 5 hours Setting time: 24…

FUGOLASTIC

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is used as a substitute for water to mix Keracolor FF and GG cementitious grouts, to improve the grout compactness,…

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is…

GRANIRAPID

High performance, deformable, fast setting and hydrating two-component cementitious adhesive for ceramic tiles and stone material.

High performance, deformable, fast setting and hydrating two-component…

KERACOLOR FF

TECHNICAL DATA: Pot life: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to light foot traffic: 24 hours. Ready for use: 7 days. Colours: 14…

TECHNICAL DATA: Pot life: approx. 2 hours. Waiting time before finishing: 10-20…

KERAFLEX MAXI S1

High-performance polymer modified cementitious adhesive.

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

LAMPOSILEX

Safe for use in potable water AS/NZS 4020:2018

MAPENET 150

DESCRIPTION: Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. …

DESCRIPTION: Alkali-resistant glass fibre mesh (in compliance with the ETAG…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%.

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

PRIMER G

Synthetic resin-based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin-based primer in water dispersion. Applications: Treating gypsum…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

TOPCEM

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds.

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…

ULTRAPLAN

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 15 mm. TECHNICAL DATA: Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1…

ULTRAPLAN ECO

Ultra-fast hardening self-levelling smoothing compound with very low VOC content. Applications : Interior levelling of new and existing substrates, as long as not subject to moisture, to make them…

Ultra-fast hardening self-levelling smoothing compound with very low VOC…

ULTRAPLAN MAXI

DESCRIPTION: Ultra-fast hardening self-levelling smoothing compound for thicknesses from 3 to 40 mm. APPLICATION: Interior levelling of new and existing substrates to make them suitable for…

DESCRIPTION: Ultra-fast hardening self-levelling smoothing compound for…