Project Neftohimik Building,


Yard	Stone application and facade renovation
Location	Bulgaria
Subcategory	INDUSTRY
Built in	2019
Opened in	2020
Application	Products for ceramic and stone materials
Start and finish date	2019/2020
Application Type	Facade interventions, Installation of floors, Waterproofing systems
Client	Municipality of Burgas
Contractor company	Bulplast BG
Installer companies	Max Group
Project Manager	Marin Tzvetkov
MAPEI Coordination	Ivan Ivanov, Nikolay Zheliazkov, Petar Yankov

ADESILEX PG4

Two-component, thixotropic, epoxy adhesive with modified-rheology for bonding Mapeband, Mapeband Flex Roll, Mapeband TPE, PVC braces, Hypalon and for structural bonding.

Two-component, thixotropic, epoxy adhesive with modified-rheology for bonding…

FUGOLASTIC

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is used as a substitute for water to mix Keracolor FF and GG cementitious grouts, to improve the grout compactness,…

Liquid polymeric additive for Keracolor FF and GG. Applications: Fugolastic is…

KERACOLOR FF

TECHNICAL DATA: Pot life: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to light foot traffic: 24 hours. Ready for use: 7 days. Colours: 14…

TECHNICAL DATA: Pot life: approx. 2 hours. Waiting time before finishing: 10-20…

KERAFLEX EASY S1

DESCRIPTION: Easy-to-apply high-performance deformable cementitious adhesive with extended open time and high wetting capacity for ceramic and porcelain tiles and stone materials. With very low…

DESCRIPTION: Easy-to-apply high-performance deformable cementitious adhesive…

KERAFLEX MAXI S1

High-performance polymer modified cementitious adhesive.

KERALASTIC T

High performance two-component polyurethane adhesives for ceramic tiles and stone material. Applications: Keralastic is an improved reaction resin adhesive (R2). Interior and exterior floor and wall…

High performance two-component polyurethane adhesives for ceramic tiles and…

MAPELASTIC AQUADEFENSE

DESCRIPTION: Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from…

DESCRIPTION: Ready-to-use, ultra quick-drying, flexible liquid membrane for…

MAPELUX LUCIDA

Double-reticulation, high-strength shiny metallic wax. TECHNICAL DATA: Appearance: emulsion. Colour: bluish-white. Application temperature range: from +10°C to +30°C. pH: 8.4 ± 0.2. Storage: 12…

Double-reticulation, high-strength shiny metallic wax. TECHNICAL DATA:…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

Synthetic rubber latex for improving adhesion of cementitious mortars. Planicrete is a latex based on synthetic polymers, which cannot be re-emulsified in water after hardening and are also resistant…

Synthetic rubber latex for improving adhesion of cementitious mortars.…

PLASTIMUL

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA: Consistency: thick paste. Density: 1.2 g/cm³. pH: 10. Dry solids content: approx. 76%. Storage: 12 months. Minimum application…

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA:…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

TOPCEM

DESCRIPTION: Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates…

DESCRIPTION: Special normal-setting, quick-drying (4 days),…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…

ULTRATOP LOFT F

One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect. ULTRATOP LOFT is made up of ULTRATOP…

One-component trowellable coarse-textured cementitious paste applied in layers…