Project Hardangerbadet, Øystese


Yard	Swimming pools
Location	Øystese, Norway
Subcategory	SWIMMING POOL
Built in	2018
Opened in	2019
Application	Delivery of complete solutions for waterproofing, tiling and concrete preparation
Start and finish date	2018/2019
Application Type	Concrete restoration systems, Floor/wall covering, New building, Waterproofing systems
Client	Hardangerbadet AS
Contractor company	LAB Entreprenør AS
Installer companies	Smistad Mur og Flis AS
MAPEI Distributor	Modena Gruppen
Credits	Viggo Moen, Mapei AS
MAPEI Coordination	Viggo Moen, Alf Ruud

MAPEBAND

DESCRIPTION: Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120…

DESCRIPTION: Alkali-resistant rubber tape with felt for cementitious…

Medium strength (40 MPa) thixotropic mortar for the repair of concrete. Use Mapegrout T40 to repair damaged concrete surfaces such as balconies and corners of columns and beams. Mapegrout T40 is also…

Medium strength (40 MPa) thixotropic mortar for the repair of concrete. Use…

MAPEGUM WPS

ADVANTAGES: Very low emission of volatile organic compounds. Ready to use. Mapegum WPS complies with the VOC limit requirements for exposure to toxins and indoor pollutant credits in the relevant…

ADVANTAGES: Very low emission of volatile organic compounds. Ready to use.…

MAPENET 150

DESCRIPTION: Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. …

DESCRIPTION: Alkali-resistant glass fibre mesh (in compliance with the ETAG…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic rubber latex for improving adhesion of cementitious mortars. Planicrete is a latex based on synthetic polymers, which cannot be re-emulsified in water after hardening and are also resistant…

Synthetic rubber latex for improving adhesion of cementitious mortars.…

PRIMER FD

DESCRIPTION: One-component primer for silicone sealants. TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm…

DESCRIPTION: One-component primer for silicone sealants. TECHNICAL DATA: …

PRIMER G

Synthetic resin-based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin-based primer in water dispersion. Applications: Treating gypsum…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…