Project VilaPark Olomouc, Olomouc


Yard	Appartments houses
Location	Olomouc, Czech Republic
Subcategory	APARTMENTS
Built in	2019
Opened in	2020
Application	leveling and repair of surfaces, concrete remediation, waterproofing of bathrooms, laying of tiles and paving, laying PVC roofing foil
Start and finish date	2019/2020
Application Type	Concrete restoration systems, Floor/wall coverings, New building, Waterproofing systems
Client	GEMO a.s.
Contractor company	GEMO a.s.
Installer companies	GEMO a.s.
MAPEI Distributor	GEMO a.s.
Credits	MG Trade
MAPEI Coordination	Jan Bébar

ECO PRIM GRIP PLUS

Multi-purpose, ready-to-use, low odour, bonding promoter primer with very low emission of volatile organic compounds (VOC) for render, smoothing and levelling compounds and cementitious adhesives,…

Multi-purpose, ready-to-use, low odour, bonding promoter primer with very low…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. WHERE TO USE: • Monolithic construction joints between fresh and hardened concrete. • Bonding precast concrete…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

PVC tape for waterproofing systems made from liquid membranes. TECHNICAL DATA: Thickness of tape: approximately 0.7 mm. In service temperature range: from -5°C to +30°C Packaging: – rolls 120 mm wide…

PVC tape for waterproofing systems made from liquid membranes. TECHNICAL DATA:…

MAPECOAT I 24

Two-component epoxy paint for anti-acid coatings on concrete surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Colour of mix: white, grey (Ral 7001) and neutral. Application…

Two-component epoxy paint for anti-acid coatings on concrete surfaces.…

MAPEFER

Two-component corrosion-inhibiting cementitious mortar for the protection of reinforcing rods. Mapefer is a mortar made up of polymers in water dispersion, cement binders and corrosion inhibitors to…

Two-component corrosion-inhibiting cementitious mortar for the protection of…

MAPEFLEX PU 45 FT

Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…

Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for up to 25% movements.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MONOLASTIC

One-component cementitious waterproofing mortar. TECHNICAL DATA: Consistency of mix: plastic-trowable. Dry solids content: 100%. Classification: EN 14891. Storage: 12 months. Mixing water: 27-29%.…

One-component cementitious waterproofing mortar. TECHNICAL DATA: Consistency of…

PLANISEAL 88

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approx. 1 h.…

Osmotic cementitious mortar suitable for contact with drinking water, for…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRABOND ECO 4 LVT

Fibre-reinforced LVT adhesive. Specifically developed for the installation of LVT floorings, it guarantees the highest performances in terms of adhesion and dimensional stability. TECHNICAL DATA:…

Fibre-reinforced LVT adhesive. Specifically developed for the installation of…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRAPLAN

Ultra fast-drying self-levelling compound for thicknesses from 1 to 10 mm. TECHNICAL DATA: Where to use: New or existing substrates, preparing them to receive all kinds of flooring where a high…

Ultra fast-drying self-levelling compound for thicknesses from 1 to 10 mm.…

ULTRAPLAN ECO

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm, with a very low emission level of volatile organic compounds (VOC). TECHNICAL DATA: Where to use: internal…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1…