Project Robinson Blue Hotel, Ierapetra

Robinson Blue Hotel

Ierapetra, Greece

Ref #: 5

Category: TOURISM AND WELLNESS

Construction


Yard	Hotel interior and exterior floors
Location	Ierapetra, Greece
Subcategory	CLUB, HOTEL/INN
Opened in	2018
Application	Supply of products for waterproofing, floors and walls covering
Start and finish date	2018/2020
Application Type	Floor/wall covering, Waterproofing systems
Contractor company	Η-Κ ΑΕΒΕ
Installer companies	Thermal Insulation: Labrokonstantakis Pantelis, Waterproofing: Malliotakis George
Architects	Alpha Architecture Alexandrakis & Partners
Specialists involved	Alpha Architecture Alexandrakis & Partners
MAPEI Distributor	Baxevanis
Credits	Christos Drazos
MAPEI Coordination	Rerras Panagiotis

Product used for the project

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

Mapegrout Thixotropic

Shrinkage-compensated fibre-reinforced mortar for concrete repair TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT THIXOTROPIC with 15.5-16.5 parts of…

Shrinkage-compensated fibre-reinforced mortar for concrete repair TECHNICAL…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging 2 mm), applied by trowel or with a roller, for the waterproofing of balconies, basins, swimming pools and wet areas.…

Two-component, high-flexibility cementitious mortar (with crack-bridging 2…

One-component cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. TECHNICAL DATA: Consistency: powder. Colour: grey. Density of the mix (kg/m³): 1,450.…

One-component cementitious mortar for bonding and levelling insulation panels…

MAPETHERM AR1 GG

Single component, large-grained cementitious mortar for bonding and levelling insulation panels and for external thermal insulation systems. Mapetherm AR1 GG is used both internally and externally…

Single component, large-grained cementitious mortar for bonding and levelling…

MAPETHERM NET

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems. TECHNICAL DATA: Composition: 100% glass…

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when…

PLANISEAL 88

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approx. 1 h.…

Osmotic cementitious mortar suitable for contact with drinking water, for…

QUARZOLITE BASE COAT

Coloured acrylic resin-based base paint in water dispersion for filling and evening out surfaces. Quarzolite Base Coat is a coloured base product made from acrylic resin in water dispersion,…

Coloured acrylic resin-based base paint in water dispersion for filling and…

QUARZOLITE TONACHINO

High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…

High-protection, thick-layered acrylic coating product with high filling…