Project detail

Ex abbatoir - New University

Latina, Italy

Ref #: 2665

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	Structural reinforcement
Location	Latina, Italy
Subcategory	SCHOOL
Built in	2001
Opened in	2001
Application	Consolidating concrete structures with FRP fabrics
Application Type	Concrete restoration systems
Client	Soc. Argento
Contractor company	Soc. Argenta di Latina
Installer companies	Soc. Argenta di Latina
Architects	Alessandro Grimaldi
Project Manager	Alessandro Grimaldi

Product used for the project

CARBOPLATE

Pultruded carbon fibre plate with a protective plastic film on both faces

MAPEFER

Two-component corrosion-inhibiting cementitious mortar for the protection of reinforcing rods. Mapefer is a mortar made up of polymers in water dispersion, cement binders and corrosion inhibitors to…

Two-component corrosion-inhibiting cementitious mortar for the protection of…

Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT FAST-SET…

Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for…

MAPEGROUT T40

Medium-strength (40 MPa), shrinkage-compensated fibre-reinforced thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of…

Medium-strength (40 MPa), shrinkage-compensated fibre-reinforced thixotropic…

Mapegrout Thixotropic

Shrinkage-compensated fibre-reinforced mortar for concrete repair TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT THIXOTROPIC with 15.5-16.5 parts of…

Shrinkage-compensated fibre-reinforced mortar for concrete repair TECHNICAL…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPEWRAP 11

Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…

Normal setting thixotropic epoxy putty for levelling concrete surfaces.…

MAPEWRAP 12

Slow setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 12 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 12 is used…

Slow setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap…

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system". MapeWrap 31 is a two-component solvent-free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system".…

MAPEWRAP C BI-AX

Balanced high strength bidirectional carbon fibre fabric. MapeWrap C BI-AX is a bidirectional carbon fibre fabric characterised by a high modulus of elasticity and very high tensile strength.…

Balanced high strength bidirectional carbon fibre fabric. MapeWrap C BI-AX is…

MAPEWRAP C UNI-AX

High strength uni-directional continuous carbon fibre fabric with high and very high modulus of elasticity. MapeWrap C UNI-AX and MapeWrap C UNI-AX HM are uni-directional continuous carbon fibre…

High strength uni-directional continuous carbon fibre fabric with high and very…

MAPEWRAP PRIMER 1

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…

ADESILEX PG2

Product not available for this market,
contact us

MAPEWRAP C QUADRI-AX

Product not available for this market,
contact us

Ex abbatoir - New University

Construction

Browse the project Gallery

Additional Attachments

Product used for the project

Keep in touch