Project Aquarena, Sollefteå


Yard	Aquarena
Location	Sollefteå, Sweden
Subcategory	SWIMMING POOL
Built in	2011
Opened in	2012
Application	Aquarena
Start and finish date	2011/2012
Application Type	Waterproofing systems
Client	Leisure Jones/ Stephen Jones
Contractor company	NCC AB
Installer companies	Knivsta Plattsättning AB
Architects	Bo Wallin
Specialists involved	Liljewalls Arkitekter
MAPEI Distributor	Modena
Project Manager	Stefan Lindström NCC / Göran Hällstål ANJO

ADESILEX P4

Quick-hardening cementitious levelling compound for internal and external surfaces. TECHNICAL DATA: Where to use: on floors for ceramic and natural stone coatings. Workability time: more than 60…

Quick-hardening cementitious levelling compound for internal and external…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging 2 mm), applied by trowel or with a roller, for the waterproofing of balconies, basins, swimming pools and wet areas.…

Two-component, high-flexibility cementitious mortar (with crack-bridging 2…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPETEX SEL

Non-woven, macro-holed polypropylene fabric for reinforcing waterproofing membranes. Mapetex Sel is a non-woven, macro-holed fabric, made from synthetic polypropylene fibres, which is permeable to…

Non-woven, macro-holed polypropylene fabric for reinforcing waterproofing…

MONOFINISH

One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of MONOFINISH with…

One-component, normal-setting cementitious mortar for smoothing concrete and…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRALITE S1

One-component, high-performance, deformable, lightweight cementitious adhesive with no vertical slip, long open time and extremely high yield easy to apply by trowel, for ceramic tiles and stone…

One-component, high-performance, deformable, lightweight cementitious adhesive…