Project Fakultní nemocnince Olomouc, Olomouc


Yard	University Hospital Olomouc
Location	Olomouc, Czech Republic
Subcategory	HOSPITAL
Built in	2017
Opened in	2018
Application	University Hospital Olomouc
Start and finish date	2017/2018
Application Type	New building
Client	FN Olomouc
Installer companies	OHL ŽS
Architects	Adam Rujbr
MAPEI Coordination	Jan Bébar

ADESILEX P7

High performance cementitious adhesive with no vertical slip for ceramic and porcelain tiles. WHERE TO USE Interior and exterior bonding of ceramic tiles, porcelain and mosaics on floors, walls and…

High performance cementitious adhesive with no vertical slip for ceramic and…

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has a very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

ANTIPLUVIOL S

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active…

Ultra high-performance, transparent, siloxane resin water-repellent…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. WHERE TO USE: • Monolithic construction joints between fresh and hardened concrete. • Bonding precast concrete…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

KERABOND T

Cementitious adhesive with no vertical slip for ceramic tiles. WHERE TO USE: - Indoor and outdoor fixing of ceramic tiles and mosaics of all types on floors, walls and ceilings. - Spot bonding of…

Cementitious adhesive with no vertical slip for ceramic tiles. WHERE TO USE: -…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEFLEX AC4

Paintable acrylic sealant for movements up to 12.5% with a smooth effect. TECHNICAL DATA: Movement in service: 12.5%. Modulus of elasticity at 50% elongation: 0.20 N/mm². Shore A hardness: 10.…

Paintable acrylic sealant for movements up to 12.5% with a smooth effect.…

MAPEFLEX MS45

Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%.

Paintable hybrid sealant and adhesive with a high modulus of elasticity also…

Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…

Closed cell polyethylene foam cord for the correct sizing of movement joints.…

MAPEGROUT T40

Medium-strength (40 MPa), shrinkage-compensated fibre-reinforced thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of…

Medium-strength (40 MPa), shrinkage-compensated fibre-reinforced thixotropic…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for up to 25% movements.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MONOLASTIC

One-component cementitious waterproofing mortar. TECHNICAL DATA: Consistency of mix: plastic-trowable. Dry solids content: 100%. Classification: EN 14891. Storage: 12 months. Mixing water: 27-29%.…

One-component cementitious waterproofing mortar. TECHNICAL DATA: Consistency of…

NIVORAPID

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic,…

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

ULTRALITE S2 QUICK

One-component, high-performance, highly-deformable, lightweight, rapid-setting and hydrating cementitious adhesive with extended open time, good trowelability, high wetting capacity and extremely…

One-component, high-performance, highly-deformable, lightweight, rapid-setting…