PRODUCTS
Back

System for quickly installing large-format ceramic tiles over cracked flooring with an isolating and anti-fracture membrane

Old Building
Internal flooring
Installation of ceramic tiles

Application steps

1
Cracked existing floor
2
Adhesive
Apply the adhesive with a No. 5 notched trowel to bond the membrane.
3
Uncoupling anti-fracture membrane
Place the membrane on the adhesive while still fresh and press down firmly on the surface with a float or a MAPEGUARD ROLLER.
4
Adhesive
Apply the adhesive using the double-buttering method (in straight lines parallel to the short side of the tiles). Use a trowel with sloping notches (minimum notch size 10 mm) to spread the adhesive on the substrate and a trowel with 3-4 mm square notches for the adhesive on the back of the tiles.
5
Large-format ceramic tiles
6
Grout
Once the adhesive has set, carefully fill the grouts to their full depth using a rubber trowel without leaving gaps or steps.
7
Sealant
Seal the perimeter and expansion joints after inserting MAPEFOAM to set the correct depth.
You may be interested in Installation of ceramic tiles
NOT REMOVE

Keep in touch

Subscribe to our newsletter to get Mapei news

SUBSCRIBE
SUBSCRIBE