Solvent-free, water-based binder with extremely low emission levels of volatile organic compounds (VOC) and no NMP, mixed with sawdust for grouting wooden floors. Suitable for water-based varnishing cycles.
Where to use: Grouting and preparing traditional wooden floors, both pre-polished and those requiring repair. Prepare the grout by mixing the product with sawdust given off during sanding (mixing ratio Ultracoat Acqua Plus: sawdust = 3-4 : 1) until a homogenous paste is obtained. Seal the floor by applying the product with Ultracoat Steel Spatula stainless steel, forcing as much mix as possible to penetrate into the cracks.
Technical data: Consistency: liquid. Colour: whitish. Inflammable: no. Recommended application temperature range: from 10°C to 35°C. Sanding: after approximately 1 hour. Painting: the surface may be painted over after 3 hours, and within 5 hours, with water-based varnish. Storage: 12 months. Application: Ultracoat Steel Spatula stainless steel.