PROJOINT DIL PBE is a load-bearing structural joint composed of two opposing L-shaped profiles in natural aluminium and an expanding part (+/- 5 mm) in interchangeable plasticized PVC available in black or grey.

The two L-shaped structures are provided with drilled bases (diam. 10 mm) to allow the mechanical fixing with screws included in the supply. Load capacity for pedestrians, light trolleys, stretchers, and cars up to 6,8 kN, for trucks up to 35 kN with a maximum load on the pneumatic wheel of 9,8 kN.

The profile's height must be 0.5÷1mm equal to or lower than the tile thickness, never higher.

The use of the joint must be verified considering the chemical, mechanical, or other stresses of the place where it is installed.

The regulations concerning the joints and the distance between them must be indicated by the project architect or the work supervisor (with reference to the country's regulations).