Solvent-free accelerator for epoxy primers. TECHNICAL DATA: Appearance: liquid. Colour: light yellow. Density: 0.97 g/m³. Viscosity at +23°C: 200 mPa·s. Consumption: 2-3% of the total weight of the…
Solvent-free accelerator for epoxy primers. TECHNICAL DATA: Appearance: liquid.…
Three-component epoxy-cementitious primer for non-absorbent waterproofing damp substrates. TECHNICAL DATA: Consistency: comp. A liquid; comp. B liquid; comp. C powder. Colours: comp. A white; comp. B…
Three-component epoxy-cementitious primer for non-absorbent waterproofing damp…
MAPECOAT TNS FINISH 1.3.4 is a coloured acrylic resin-based coating product with selected fillers, specifically formulated in Mapei Research & Development laboratories, for indoor and outdoor tennis…
MAPECOAT TNS FINISH 1.3.4 is a coloured acrylic resin-based coating product…
Concrete superplasticiser based on modified acrylic polymer; developed specifically for ready mix concrete industries; where the highest levels of concrete quality and performance is required
Concrete superplasticiser based on modified acrylic polymer; developed…
Hyperplasticising admixture based on a new generation of polycarboxylate ether for high performance concrete mixes with very low water cement ratios, high early compressive strengths, particularly…
Hyperplasticising admixture based on a new generation of polycarboxylate ether…
Superplasticizer admixture based on polymer modified polycarboxylate ether for high performance concrete mixes with very low water/cement ratios, high compressive strengths and long slump retention…
Superplasticizer admixture based on polymer modified polycarboxylate ether for…
Hyperplasticising admixture based on a new generation of polycarboxylate ether for high performance concrete mixes with very low water cement ratios, high early compressive strengths, particularly…
Hyperplasticising admixture based on a new generation of polycarboxylate ether…
One component transparent primer for absorbent surfaces. Primer AS is a one component, epoxy-isocyanic primer in solvents used on absorbent surfaces, to help the bonding of Mapeflex PU40, Mapeflex…
One component transparent primer for absorbent surfaces. Primer AS is a one…
Two-component cement mortar for concrete finishing Where to use For superficial protection and levelling of concrete surfaces. Consumption 2 kg/m2 per mm of thickness. Packaging Units of 30.5 kg…
Two-component cement mortar for concrete finishing Where to use For superficial…
Pultruded carbon fibre tube impregnated with epoxy resin for reinforced stitching in masonry. TECHNICAL DATA: Tensile modulus of elasticity: 170,000 N/mm². Content of fibre by weight: 68%. Tensile…
Pultruded carbon fibre tube impregnated with epoxy resin for reinforced…