High-efficiency, silicon resin-based, high-transpiration, high water-repellence, anti-alga and anti-mould protective paint in water dispersion for internal and external applications. For painting…
Two-component epoxy primer for priming cementitious bridge deck substrates before waterproofing with an asphalt or synthetic membrane layer. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1.…
Two-component epoxy primer for priming cementitious bridge deck substrates…
Transpirant, water-repellent, scratch-effect, trowelable siloxane coating product with good defect covering properties for internal and external surfaces. Available in the following granulometries:…
Highly transpirant, thick-layered silicate coating product with high filling properties for internal and external surfaces in compliance with DIN 18363. Available in the following granulometries: 0.7…
Highly transpirant, thick-layered silicate coating product with high filling…
Water-repellent acrylic-siloxane paint with high resistance to UV rays for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the…
Water-repellent acrylic-siloxane paint with high resistance to UV rays for…
Silicone resin based insulating primer in water dispersion. Silancolor Primer is a silicone resin based primer in water dispersion with high penetration property. Silancolor Primer uniforms the…
Silicone resin based insulating primer in water dispersion. Silancolor Primer…
Micronized acrylic-based primer in water dispersion. Malech is used as a primer for wall surfaces in general (e.g. concrete or repairs with cement mortars) before applying a coloured finishing coat…
Micronized acrylic-based primer in water dispersion. Malech is used as a primer…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…
Fine-grained coloured coating made from acrylic resin in water dispersion and micro-granular quartz sand, for indoor and outdoor tennis courts, multi-purpose playing fields, cycle tracks and footpaths
Fine-grained coloured coating made from acrylic resin in water dispersion and…
Super-fluid, salt-resistant, lime and ECO-POZZOLAN-based, hydraulic binder with fillers applied by injection for consolidating masonry. TECHNICAL DATA: Maximum diameter of aggregate: 100 µm. Mixing…
Super-fluid, salt-resistant, lime and ECO-POZZOLAN-based, hydraulic binder with…
Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces broadcast with quartz sand. TECHNICAL DATA: Application…
Surface treatment in liquid form made from lithium silicate with a…
Cement-free lime- and Eco-Pozzolan-based fine mortars, respectively light-coloured and light pink, for finishing dehumidifying mortars applied on stone, brick and tuff masonry. Mape-Antique FC is a…
Cement-free lime- and Eco-Pozzolan-based fine mortars, respectively…
One-component cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. TECHNICAL DATA: Consistency: powder. Colour: grey. Density of the mix (kg/m³): 1,450.…
One-component cementitious mortar for bonding and levelling insulation panels…
Paintable acrylic sealant for movements up to 12.5% with a smooth effect. TECHNICAL DATA: Movement in service: 12.5%. Modulus of elasticity at 50% elongation: 0.20 N/mm². Shore A hardness: 10.…
Paintable acrylic sealant for movements up to 12.5% with a smooth effect.…
Two-component, solvent-free epoxy paste in water dispersion to create floors with a trowel-effect or mottled finish. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: comp. A :…
Two-component, solvent-free epoxy paste in water dispersion to create floors…
Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…
Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…
Hydro-oil repellent and anti-stain treatment for concrete, natural stone and cementitious surfaces made from modified organic polymers in water solution. TECHNICAL DATA: Application temperature…
Hydro-oil repellent and anti-stain treatment for concrete, natural stone and…
Water-repellent, thick-layered acrylic-siloxane coating with high filling properties for internal and external surfaces. Available in the following granulometries: 1.2 mm. TECHNICAL DATA:…
Water-repellent, thick-layered acrylic-siloxane coating with high filling…
