Hyperplasticising admixture based on polymer modified polycarboxylate ether for high performance concrete mixes with very low water cement ratios, high compressive strengths, long slump retention and…
Hyperplasticising admixture based on polymer modified polycarboxylate ether for…
Hyperplasticising admixture based on a new generation of polycarboxylate ether for high performance concrete mixes with very low water cement ratios, high early compressive strengths, long slump…
Hyperplasticising admixture based on a new generation of polycarboxylate ether…
Reversible consolidating product in solvent for the conservative restoration and consolidation of porous stone substrates, lime render and layers of paint. TECHNICAL DATA: Consistency: colourless…
Reversible consolidating product in solvent for the conservative restoration…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…
Two-component, self-levelling, neutral-coloured, highly flexible polyurethane binder with fillers. Mapefloor PU 400 is a two-component formulate with fillers made from polyurethane resin, used to…
Two-component, transparent, non-yellowing epoxy coatings applied at a thickness of 1 mm for finishing coats on epoxy resin systems. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 100 : 50. Colour…
Two-component, transparent, non-yellowing epoxy coatings applied at a thickness…
Two-component epoxy binder used for preparing trowelled mortar with a damp earth consistency for industrial floors. TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 100 : 50. Colour of mix:…
Two-component epoxy binder used for preparing trowelled mortar with a damp…
Two-component epoxy binder for trowelled mortar or bonding promoter for resin coatings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 100 : 50. Colour of mix: transparent straw-coloured.…
Two-component epoxy binder for trowelled mortar or bonding promoter for resin…
Lime-cement skimming mortar with an ultra-fine-textured finish for render. TECHNICAL DATA: Maximum dimension of aggregate: < 0.1 mm. Mixing ratio: 100 parts of PLANITOP 560 with 39-43 parts of water.…
Lime-cement skimming mortar with an ultra-fine-textured finish for render.…
Water-repellent cementitious skimming mortar with a fine-textured, natural finish for render and concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of PLANITOP…
Water-repellent cementitious skimming mortar with a fine-textured, natural…
Water-repellent cementitious skimming mortar with a fine-textured, natural finish for concrete and plastic, glass and porcelain coverings. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm.…
Water-repellent cementitious skimming mortar with a fine-textured, natural…
Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…
Normal setting thixotropic epoxy putty for levelling concrete surfaces.…
Fluid ultra rapid setting two-component polyurethane resin to be injected for consolidating and water-proofing structural elements subject to weak water ingress. Use Foamjet F to consolidate rocks,…
Fluid ultra rapid setting two-component polyurethane resin to be injected for…
Gel detergent for graffiti-damaged surfaces. WallGard Graffiti Remover Gel is recommended for all surfaces not previously treated with graffiti-repellent protection against conventional spray-paints.…
Gel detergent for graffiti-damaged surfaces. WallGard Graffiti Remover Gel is…
Reversible graffiti-resistant protective barrier for all surfaces. WallGard Graffiti Barrier is recommended for protecting marble, granite or natural stone facings against graffiti drawn with…
Reversible graffiti-resistant protective barrier for all surfaces. WallGard…
One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of MONOFINISH with…
One-component, normal-setting cementitious mortar for smoothing concrete and…
Shrinkage-compensated fibre-reinforced mortar for concrete repair TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT THIXOTROPIC with 15.5-16.5 parts of…
Shrinkage-compensated fibre-reinforced mortar for concrete repair TECHNICAL…
