White high performance cementitious adhesive with no vertical slip and extended open time for glass, ceramic and marble mosaic coverings. Applications: Interior and exterior floor, wall and swimming…
White high performance cementitious adhesive with no vertical slip and extended…
Cementitious adhesive for ceramic tiles. Applications: Interior and exterior floor and wall bonding of all types of small sized ceramic tiles and mosaics for environments that are not particularly…
Cementitious adhesive for ceramic tiles. Applications: Interior and exterior…
Cement-based adhesive for tiles. Applications: Internal and external bonding of ceramic tiles and mosaics, single-fired and double-fired tiles for floors, walls and ceilings. Technical data: Pot…
Cement-based adhesive for tiles. Applications: Internal and external bonding of…
Cementitious adhesive with no vertical slip for ceramic tiles. WHERE TO USE: - Indoor and outdoor fixing of ceramic tiles and mosaics of all types on floors, walls and ceilings. - Spot bonding of…
Cementitious adhesive with no vertical slip for ceramic tiles. WHERE TO USE: -…
Ready-to-use grout smoother for lose-lay LVT. This product is used to level off and smooth over (down to a feather edge in layers up to 2 mm thick) existing internal ceramic and stone surfaces. It…
Ready-to-use grout smoother for lose-lay LVT. This product is used to level off…
Pre-blended mortar with high compressive strength and good resistance to de-icing salts, freeze-thaw cycles, and seawater with exceptional physical-chemical characteristics suitable for areas exposed…
Pre-blended mortar with high compressive strength and good resistance to…
Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities.
Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…
Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic,…
Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…
Ultra fast-drying self-levelling compound for thicknesses from 1 to 10 mm. TECHNICAL DATA: Where to use: New or existing substrates, preparing them to receive all kinds of flooring where a high…
Ultra fast-drying self-levelling compound for thicknesses from 1 to 10 mm.…
Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm. TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3…
Smoothing mortar for internal and external walls and ceilings for thicknesses…
Hyperplasticising admixture based on new generation
of polycarboxylate ether for high performance
concrete mixes with very low water cement ratios,
high early compressive strengths, specially…
Hyperplasticising admixture based on new generation
of polycarboxylate ether…
High range water reducing superplasticizer
for high strength concrete and concrete containing
high proportions of GGBS and silica fume. Mapefluid N350 EG is a chloride free superplasticizing…
High range water reducing superplasticizer
for high strength concrete and…
Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasion-resistant floors.
Self-levelling, ultra-quick hardening mortar with special hydraulic binders,…
Agent applied by injection made from micro-emulsion, concentrated silane and siloxane used to form a chemical barrier against capillary rising damp in masonry. TECHNICAL DATA: Dimension of particles:…
Agent applied by injection made from micro-emulsion, concentrated silane and…
Fibreglass cord for impregnation with MapeWrap 21 (two component, super-fluid epoxy resin). MapeWrap G FIOCCO is a complete range of cord in unidirectional fibreglass. It is used for creating…
Fibreglass cord for impregnation with MapeWrap 21 (two component, super-fluid…
Carbon fibre cord for impregnation with MapeWrap 21 (two-component super-fluid epoxy resin). MapeWrap C FIOCCO is a complete range of cord in unidirectional carbon fibre with a high modulus of…
Carbon fibre cord for impregnation with MapeWrap 21 (two-component super-fluid…
Rubber tape sandwiched between two layers of non-woven fabric to form elastic joints in waterproofing systems. TECHNICALDATA: Type of material: rubber sandwiched between two layers of non-woven…
Rubber tape sandwiched between two layers of non-woven fabric to form elastic…