Ready-mixed 40% silane-based, hydrophobising, migrating liquid in water emulsion applied to the surface of reinforced concrete structures. TECHNICAL DATA: Dilution rate: ready-mix. Colour: white.…
Ready-mixed 40% silane-based, hydrophobising, migrating liquid in water…
Zinc plate with adhesive backing for galvanic cathodic protection against the corrosion of steel structures exposed to atmospheric conditions. TECHNICAL DATA: Thickness of plate: 0.80 mm. Height: –…
Zinc plate with adhesive backing for galvanic cathodic protection against the…
Adhesive zinc plates applied directly on the surface of structures for galvanic cathodic protection against the corrosion of steel reinforcement rods. TECHNICAL DATA: Thickness of plate: 0.25 mm.
Adhesive zinc plates applied directly on the surface of structures for galvanic…
One-component primer for silicone sealants. TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint).…
One-component primer for silicone sealants. TECHNICAL DATA: Application of…
Polyurethane sealant with a low modulus of elasticity. Ready-to-use one-component thixotropic product for flexible expansion joints and fillet joints in pre-fabricated buildings, conventional and…
Polyurethane sealant with a low modulus of elasticity. Ready-to-use…
Liquid admixture to produce lightweight concrete. Mapeair Foam is a ready to use liquid foaming agent which is used to produce lightweight foam concrete for a variety of insulation and construction…
Liquid admixture to produce lightweight concrete. Mapeair Foam is a ready to…
Calcium nitrite based corrosion inhibiting concrete admixture. Mapeshield CI300 ME is a chloride-free, ready to use aqueous solution of Calcium Nitrite exhibiting a neutral concrete setting time. It…
Calcium nitrite based corrosion inhibiting concrete admixture. Mapeshield CI300…
Hyperplasticising admixture based on a new generation of polycarboxylate ether for high performance concrete mixes with very low water-cement ratios, high early compressive strengths, long slump…
Hyperplasticising admixture based on a new generation of polycarboxylate ether…
One-component, ready-to-use, solvent-free, flexible polyurethane adhesive for all types of parquet on screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM and TOPCEM PRONTO, cementitious screeds, old…
Two-component, epoxy-polyurethane adhesive for bonding all types and sizes of parquet on screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM or TOPCEM PRONTO, cementitious screeds, old wooden, ceramic,…
Two-component, epoxy-polyurethane adhesive for bonding all types and sizes of…
One-component, solvent-free, silylated polymer adhesive with very low emission level of volatile organic compounds, for all types of parquet. TECHNICAL DATA: Consistency: creamy paste. Colour: beige.…
One-component, solvent-free, silylated polymer adhesive with very low emission…
Solvent free polyurethane monocomponent adhesive for bonding MAPEPLAN synthetic waterproofing membranes with non-woven polyester fleece backing, PVC-P MAPEPLAN Af and FPO/TPO MAPEPLAN T Af.
Solvent free polyurethane monocomponent adhesive for bonding MAPEPLAN synthetic…
Two-component, solvent-free, spray applied, hybrid polyurea membrane applied on site using a high-pressure, bi-mixer type pump to form waterproof coatings on roofs
